您当前浏览器版本过低,请使用IE 10、Firefox 30.0或Chrome 24.0 以上浏览器访问此网站。 关闭

Material Directional Control

Equipment Reliability and Improved processes

Material Directional Control

In metal production, material is sent through a production process. This allows for the metal to be shaped via forging, extrusion, or some other process. The shaping of metal is essential for the production of tubes, structural beams and other products that come from metal. Producers are under constant pressure to increase profitability and quality while decreasing costs and environmental impact.

 

Continuous Casting. Continous Solutions.

 

The process of hot rolling involves metalworking above the recrystallization temperature of the metal being worked. After the grains deform during this process, they will recrystallize if the temperature is low enough. If this recrystallizing occurs, the result is a microstructure that prevents the metal from hardening.  If this were to occur during the production of a steel beam for buildings, it could be a disaster.

 

Most metalwork starts out as large piece of metal such as slabs, billets or blooms. These products are often the result of continuous casting operations, and the products are generally fed directly into the rolling mill at the proper temperature. In a small metal production environment, the metal starts at room temperature and heating is required via gas, or oil fired soaking pits, in some cases induction heating is used.

 

As this material is worked the temperature needs to be maintained above the recrystallization temperature, usually this is 50-100 C or 90 to 180 F.  If the temperature drops below this range, then it must be reheated before it can continue to be worked.

Metals processed this way generally have little directionality, however in some instances non-metal particles will impart directionality on the metal. This results in a non-uniform shape. The metal is still good quality, but the mill scale covering the metal needs to be removed. 

We have responded to industry needs with a variety of products    

Contact our team of filtration experts for more information on improving the efficiency of the your processes.

 

选择行业
  • 航空航天
  • 生物制药
  • 化工与聚合物
  • 食品与饮料
  • 工业制造
  • 实验室
  • 医疗
  • 微电子
  • 石油与天然气
  • 未分类
  • 电力与公共设施
选择问题类型
  • 一般咨询
  • 产品信息
  • 价格信息
  • 技术支持
  • 订单问题
  • 质量问题

Thank You

We will get in touch with you very shortly.

Maxamized service life

Athalon Filter

Pall’s Athalon hydraulic and lube oil filters offer the ultimate performance. These filters combine Betax(c)≥2000 rated, stress resistant technology, and a full range of housings to provide superior performance. Athalon filters are laid over pleat (LOP) geometry.  This allows for maximization of the filtration area, increased flow handling, reduced filter element size, and improved fluid cleanliness across the filtration process.

 

Additionally, this filter improves real world performance with anti-static construction, preventing static damage to the filter element, housing, or fluids. Athalon’s cageless construction makes it 60% lighter than comparable filter elements and reduce disposal costs.  Athalon filter elements can be incinerated or shredded, in addition to crushing. The filter is simple and inexpensive to install or maintain because it uses common port and mounting interfaces.

 

A filter’s ability to sustain fluid cleanliness for its entire service life is a critical measure of performance. Athalon Athalon is the only filter that continues to provide quality fluid cleanliness, even late in service life.

 

Pall’s Coralon Series

 

Pall’s Coralon series has been demonstrated to produce 15X cleaner fluids and 16X more consistent performance over the service life of the filter, providing a savings of 20% in overall filtration cost. The Coralon filter produces consistent performance for the full service life. Testing shows there is no drop in efficiency or performance, unlike competitor products, unless the filter is blocked. Blocking means that the filter has been working to remove contaminants from the product being filtered. It is the most advanced filter media available for lube and hydraulic fluid applications on the market today.

 

Red 1000 Series

 

This series is designed to assist customers that need to upgrade competitor filter housings. It is part of the Coralon series and provides an economical solution to consumers that are looking for advanced protection of critical system components, but aren’t ready to change their filters to a Pall product.

 

For more information about Pall filtration technology for primary metal producers, click here to contact one of our experts.

We have a long history of working with these industries to provide cost saving solutions and process improvement.

How can we help?

If you are looking for innovative filtration solutions, you’ve come to the right place. Our knowledgeable subject matter experts are here for you. Contact us for more information. Thank you and we look forward to assisting you shortly.

选择行业
  • 航空航天
  • 生物制药
  • 化工与聚合物
  • 食品与饮料
  • 工业制造
  • 实验室
  • 医疗
  • 微电子
  • 石油与天然气
  • 未分类
  • 电力与公共设施
选择问题类型
  • 一般咨询
  • 产品信息
  • 价格信息
  • 技术支持
  • 订单问题
  • 质量问题

Thank You

We will get in touch with you very shortly.